These are the procedures for mounting a towel rail:

Find the wall studs where you wish to mount the towel rail. The support-giving wooden beams inside the wall are known as studs. To guarantee that the towel rail is firmly fastened, you must screw it into the studs.

The towel rail's intended height should be measured and noted on the wall.

Mark the holes for the screws with a pencil while you hold the towel rail mounting plate up against the wall at the designated height.

Using a drill and a drill bit that is slightly smaller than the screws, pre-drill holes into the designated locations.

With the mounting plate pressed up against the wall, fasten the screws holding it to the wall with a screwdriver.

Making ensuring it is firmly in position, slide the towel rail onto the mounting plate.

Using a screwdriver or a wrench, tighten any nuts or screws holding the towel rail to the mounting plate.

Towel rails should be tested to make sure they are placed securely and can support the weight of towels.

It's crucial to adhere to the manufacturer's instructions and use caution when drilling and screwing into the wall for your particular towel rail. It is preferable to employ a professional to instal the towel rail if you are unclear of how to do it safely.