Why combine a bidet with a toilet roll holder
Retrofitting a standalone bidet spray into an existing bathroom usually means finding wall or cistern space for the spray holder as well as the valve. Bluegum's Chrome Bidet Set (BLUEGUM-BIDETSET, $149) solves that by building the bidet spray holder and toilet roll holder into one fitting with an integrated tray, so a small bathroom gains bidet function without needing extra wall space for a second accessory.
How it works
The set uses a concealed brass bidet valve with a WaterMark-approved build, paired with the integrated toilet roll holder and tray in a chrome finish. "Concealed" means the valve body sits behind the finished wall or fixture, with just the control and spray visible — keeping the look clean and reducing exposed fittings that could be knocked or damaged.
Where this suits
Small ensuites, rental bathroom upgrades, or any retrofit where there's no spare wall space for a separate bidet unit are the obvious fit. Because it combines two fixtures' worth of function into roughly the footprint of one, it's a practical way to add bidet function to an existing layout rather than a full bathroom remodel.
Pairing with isolation
If this bidet set is sharing a supply with another fixture (a toilet cistern, for instance), our 2-way stop valve guide covers how to give each fixture independent isolation from a single take-off point.
Frequently Asked Questions
Does this bidet set need a separate water supply line?
It needs its own isolated take-off from the existing cold supply — a 2-way stop valve (see linked guide) is a common way to split a single existing line between the bidet and another fixture like a toilet cistern.
What does "concealed valve" mean?
It means the valve body is hidden behind the wall or fixture, with only the control and spray head visible — giving a cleaner look than an exposed valve body.
Is the bidet set suitable for a small bathroom?
Yes — combining the bidet spray holder with the toilet roll holder is specifically aimed at saving wall space in smaller bathrooms where a separate bidet unit wouldn't easily fit.
Is this bidet set WaterMark approved?
Yes, the concealed brass valve carries WaterMark approval, confirming it's been tested against the Australian plumbing product standard.