Float Switches & Level Sensors

Tethered float switches for switching pumps and level alarms on water level, in pump pits, sumps, septic tanks and water tanks.

• Maxijet 9006: 240V AC 6A microswitch with NO and NC contacts, 25° switching angle, ABS housing, IP68 at 20m, 10m to 50m cable.
• Hyjet HFS heavy duty: 240V AC 10A, 20° switching angle, sliding detent action that avoids wave-induced switching, 10 million switch contact life, 10m to 40m cable.

Tether length sets the on and off levels. Wire normally open for emptying (pump-down or high level alarm) or normally closed for filling (pump-up or low level alarm). Larger pumps should be switched through a pump controller. Level transducers and probes listed here aren't orderable online at the moment; contact PSA if you need one.

Guide: Float Switches for Pumps and Alarms: Tether Length, NO vs NC, and Current Rating

Need help? Call our team on 0414 040 452 or email sales@plumbersupplies.com.au.