
Flexseal shear band couplings are for joins where a plain flexible coupling isn't enough: big ODs, rough pipe surfaces, or ground that's likely to move after backfill. The Fernco Icon covers the opposite problem, where you can't get around the outside of the pipe at all.
Flexseal standard shear band couplings
- 50mm to 620mm OD, for sewer, drainage and low-pressure lines rated to 250kPa
- EPDM sleeve with a 316 stainless shear band the full width of the coupling, which holds the pipes in line if the ground settles
- Seals on concrete, clay, cast iron and PVC
- -50 to 80 degC constant, and 100 degC intermittent
- Tighten to 6Nm up to SC200 and 13Nm from SC225 up
For larger OD differences, add a Flexseal reducing bush or Multibush.
Fernco Icon internal push-fit couplings
The Icon joins DN100 and DN150 pipe from the inside, for pipe cast into concrete or cut flush to a floor or wall. The pipe stop sits flush with the pipe end when it's fully home, so you can see it's in right. It comes in straight and reducing sizes and has little effect on flow.
More options are in the full Fernco range.
Save $12.99

Hydroflow
Flexseal Shear Band Standard Coupling - EPDM & 316 Stainless, 50mm to 620mm OD
Sale priceFrom $64.95
Regular price$77.94
Save $14.39

Hydroflow
Fernco Icon Internal Push-Fit Coupling - DN100 & DN150 Drain Pipe
Sale priceFrom $71.95
Regular price$86.34
