Pedrollo is an Italian pump manufacturer, and many of its listings note the pump is made in Italy. PSA's Pedrollo collection covers a lot of the catalogue, but not every listed model is orderable online right now. This guide sorts the ones that are by job, with the detailed guide for each.
House and farm pressure
- JSW 3BM and JSWm 2A self-priming jet pumps, for drawing from a tank, shallow well or dam.
- JCRm 1A-EP1: a stainless self-priming jet pump supplied with an EP1 pressure controller.
- PKm 60-EP1 peripheral pump with an EP1 controller: high pressure from a small motor on clean water. It needs priming and a foot valve.
- CPm 160B centrifugal pump: 1.5kW, 220 L/min, for transfer and irrigation. Not self-priming, so it needs flooded suction or a foot valve.
Guides: Jet, Peripheral or Deep Well? · Centrifugal Transfer Pumps
Bores, wells and tanks
- 4BLOCK 4 inch bore pumps: six stainless models from 60 to 200 L/min and up to 140m head.
- TOP MULTI 1 and 2: submersible multi-impeller pumps for tanks and wells. The TOP-MULTI TECH 2 adds a built-in controller.
- UPm and NKm stainless multistage submersibles, with a float on the NKm 4/5 GE. A horizontal mounting kit is available for the UP series.
Guide: Sizing a Submersible Bore Pump
Off-grid
- Fluid Solar 4 inch stainless solar bore pumps, four models from 38m to 140m head.
Guide: Pedrollo Fluid Solar Bore Pumps
Drainage and sewage
- TEX 2 and TEX 3: vortex pumps with a vertical float that work in sumps as small as 220mm and pass solids up to 30mm.
- BCm 15/50 and stainless BCm 10/50-ST: double channel pumps passing solids up to 50mm.
- Plug & Drain: a portable flood kit that drains to about 2mm above the floor.
Guides: Choosing a Drainage or Sump Pump · Choosing a Sewage Pump
Transfer
- TOP MULTI 1-AD: an automatic submersible configured for AdBlue transfer from tanks and IBCs. Guide: Fire Pump vs Transfer Pump
Controls
- Easypress 1M and 2M electronic pressure controllers with a gauge and leak-cycling protection. Guide: Pressure Controller vs Pressure Switch
Packaged systems
Several MaxiSAVE rain to mains packages are built around Pedrollo pumps (JCRm 1A-EP1, 3CRm, 4CRm and 5CRm 100-EP1 multistage, and the TOP-MULTI TECH 2). See Rain to Mains Systems Compared.
Models not orderable online
A number of Pedrollo listings, including the standalone 3CRm to 5CRm multistage pumps, the DG PED and Tissel VSD systems, and the Dm, RXm, ZXm, VX, MC and TOP 2 drainage and sewage pumps, aren't orderable online at the moment. If you need one, contact PSA. Most of the live range is available on backorder, so confirm lead time if a job has a deadline.
Frequently Asked Questions
Are Pedrollo pumps made in Italy?
Pedrollo is an Italian manufacturer, and many of its listings, including the Fluid Solar, Easypress, Plug & Drain and TOP MULTI 1-AD, note they are made in Italy.
Which Pedrollo pump suits a 4 inch bore?
The 4BLOCK range for mains-powered bores, or the Fluid Solar range for off-grid solar supply.
Which Pedrollo pump works in a small sump?
The TEX 2 or TEX 3, whose vertical float lets them work in sumps as small as 220mm.
Does the Pedrollo PKm peripheral pump self-prime?
No. It needs priming and a foot valve on the suction line.