SHOWER RAIL, HANDSET & LEVER MIXER | COMPLETE KIT

Materials & Features Shower Rail set consists of a wall mounted Stainless Steel 900mm shower grab rail complete with lever mixer, slider, handset and 2.0m hose (1.5m available upon request). Water supply connection includes backflow prevention. Grab rail is accessible compliant when installed in accordance with AS1428.1-2009 (Amdt. 2010) and local building codes. Technical Detail Rail: #304 Stainless Steel, Satin, 32mm Dia Hose: 2.0m Inlet Connection: DN 15mm (1/2") BSP includes backflow prevention Water Pressure: 150-500 kpa Water Temperature: 5-60°C Flow Rate: 8.0 LPM WELS: 3 star Available Models RBA4110-992 Shower rail set with lever mixer, slider, handset and 2.0m hose Related Products RBA4110-991 Shower rail set with slider, handset and 2.0m hose RBA4000-075 750mm straight rail Note: For Australia, Installation shall be in accordance with the PCA [Plumbing Code of Australia] and any relevant local authority requirements. Important: Installation instructions and current rough-in details should be furnished with each fixture. Do not rough in without certified dimensions. Dimensions are subject to manufacturer’s tolerance of +/-10mm. Sourced/ Supplied under QMS Installation Should be installed with RBA4000-075 to comply with AS1428.1-2009 (Amdt. 2010). Warning: Grab rails are no stronger than the anchors or walls to which they are attached and must be firmly secured in order to support the loads for which they are intended.