A replacement or retrofit sensor assembly for the Supaflush automatic urinal flushing system. It includes the PIR sensor head, the cable and your choice of a 9V battery pack or a 9V mains power supply. The latching valve is not included. Use this assembly to replace a failed sensor, change from battery to mains power, or pair it with an existing 9V latching valve.
The sensor detects use and flushes the urinal only when needed, with a sanitary flush at a set interval to keep traps fresh in low-use periods. It saves water compared with timed cistern flushing. The installer can adjust flush time in real time with the push button, and DIP switches set the delay and sanitary interval.
Specifications
| Sensor type | Passive infrared (PIR) |
| Enclosure | ABS plastic, white |
| Mounting hole diameter | 100mm |
| Valve connector | Plug-in, polarised |
| Pre-flush option | 2 seconds |
| Valve open flush time | 3 to 300 seconds |
| Flush delay time | 1, 2, 3, 5, 10 or 30 minutes, or 1 to 6 hours |
| Sanitary flush interval | 6, 12, 18 or 24 hours |
| Interface | Selectable DIP switches and push button |
| Memory retention (battery removed) | Up to 10 years |
| Made in | Australia |
Features
- Australian made and owned
- Ceiling or wall mount versions
- Battery version needs no power point in the ceiling space
- Rust-free, enclosed sensor housing
- Real-time flush duration adjustment
- Compatible with the 9V Supaflush latching valve (sold separately)
Complete kits with the latching valve are also available. Installation instructions are available under downloads.

