A wall mounted hot water unit that delivers water at 65°C instead of boiling. It suits sites that need hot water on tap at a lower dispensing temperature. The unit fills from the mains automatically and holds water ready at the tap, with a white powder coated cover.
All models in the range run a single 2.4kW element off a standard single GPO and recover at a nominal 150 cups per hour (160ml cup). First-hour delivery is the initial draw plus 150 cups. Power management reduces element power as the water comes up to temperature, which limits steam and energy use. The Supasilent standby mode pulses the element briefly to hold temperature, so there is none of the noise of periodic reheating.
Model Selection
| Capacity | SKU | Initial draw (160ml cups) | First hour (cups) | Dimensions H x W x D (mm) |
|---|---|---|---|---|
| 3 Litre | LA0204 | 20 | 170 | 372 x 270 x 155 |
| 6 Litre | LA0384 | 38 | 188 | 423 x 314 x 171 |
| 8 Litre | LA0504 | 50 | 200 | 514 x 314 x 171 |
| 16 Litre | LA1004 | 100 | 250 | 549 x 365 x 218 |
| 25 Litre | LA1604 | 160 | 310 | 549 x 413 x 263 |
Specifications
| Type | Wall mounted, fully automatic, mains fed |
| Finish | White |
| Delivery temperature | 65°C |
| Element | 2.4kW |
| Power | Single GPO, 240V |
| Recovery | 150 cups per hour nominal (160ml cup) |
| Filtration | Unfiltered (inline filter optional) |
| Warranty | 12 months product, 3 years storage vessel (supplier terms) |
| Made in | Australia |
Features
- Australian made and owned
- Fully automatic mains fill, with 65°C water ready on demand
- Power management limits steam and energy use
- Supasilent standby, with no noisy reheat cycles
- Built for multi-shift commercial sites running 24/7
- Five capacities from 3 to 25 litres
Installation: To be installed by a licensed plumber. The vent or overflow must discharge to a tundish or air break, and both are available separately. Allow clearance above the unit for servicing, and do not mount it directly over a sink bowl. Spec sheet available under downloads.

